Mcferran Home Furniture



Furniture is the requirement of each and every home, office or just anywhere. There is not a place that stays without furniture. Today the craze for contemporary furniture has increased and people everywhere are looking for the best furniture for their homes and offices alike.

A huge range of furniture manufacturers come to one’s mind when shopping for brand furniture. One among them is the Mcferran group that manufacture high-end furniture that would suit every part of the home. Their prices are well matched in the furniture world and are a trusted warehouse for metropolitan designs.

Each homes requires a set of special furniture to suit each room. For instance for the bedroom there is a requirement for the best bedroom furniture, canopy beds, convertibles, day beds, chairs, bedside tables, cupboards and drawers, cabinets etc.

When one seeks furniture for the living room there are a lot to select, chairs, tables, closets, stands for televisions, show cases, center pieces, love seats, beautiful sofas and many more to decorate that beautiful living room.

Dining room furniture comprise of the dining table with all its grandeur and elegance surrounded by little pieces of matching furniture to make the dining room a perfect place to relax over a good meal with the entire family.

Dressers and closets, mirrors and chairs comprise the set of Mcferran furniture in the dressing room. Similarly one can decorate the entire home with all the rooms using the exclusive collection of Mcferran home furniture.

Home is where the heart is and hence it has to be well decorated so it would appear the most interesting place to come back to after a hard day’s work. Together with the family members furniture is what makes a house a home. Furniture and family are a perfect blend for a beautiful home.

Home Decor Solutions Cricut Cartridge – 7 Tips You Can Use Today



While you may think Cricut cartridges are just for scrapbooks and paper crafting, check out the Home Decor Solutions Cricut Cartridge tips and think again, my friend.

In general, cartridges are used with paper crafting projects in mind. However, many are also created to be incredibly versatile and suitable for household projects. The Home Decor Solutions Cricut cartridge is a perfect example of that.

Users may not be able to make a kitchen table out of this cartridge but they can most definitely add a bit of their personality and family memories to the home with the help of these tips.

7 Home Decor Solutions Cricut Cartridge Tips

1. With the help of this tool, users can create personalized signs to hang over your doors, desks, breakfast nooks and stoves. Today, people spend a good amount of money to accent a room with marquee signs. The Cricut cartridge includes such written gems like, “Memories,” “Simplify,” “Hope,” “Love,” “Miracle,” “Forever,” “Explore,” “Adore,” “Beautiful” and more.

2. Users can then take these same words and create personalized picture frames of themselves and their family. Simply place the word, like “Memories” for instance, above or below the pictures. Users can also accent and embellish the frames with any of the fifty graphics included in this cartridge.

3. Along the lines of picture frames, users can create frames specifically with the graphics in mind. Words like “Simplify,” “Beautiful,” and “Explore” can be accompanied by large graphics of elegant and whimsical birds, flowers, dragonflies, butterflies, hearts and stars. These can be placed anywhere in the home from your child’s room to the bathroom.

4. For those plain and boring storage closets and pantries, create labels and tags to add that personal, yet sophisticated touch.

5. For areas of empty wall space, create small, decorative canvases including phrases and graphics. Additional graphics include: a chandelier, crowns, the Fleur de Lis, branches, hearts, flowers, birds, insects, borders and embellishments. All of these can be easily combined to create gorgeous accent canvases for the home.

6. Sometimes shelves can become cluttered with keepsakes and sentimental tokens. Rather than keep them out and risk damaging and breaking them, store those items in personalized boxes decorated with graphics and words like “Memories” and “Forever.” Users can easily decorate the box with accents and borders to dress it up.

7. After decorating the home, go back to your roots and create your own collection of stationary, cards, notes, tags, scrapbook pages and more with the help of this versatile and elegant cartridge.

For all of your paper crafting and home decor needs, utilize and make the most of the Home Decor Solutions Cricut Cartridge by adding sophistication, elegance and a crafty touch to the home.

Bathroom Renovation – A Step by Step Guide



Bathrooms are one of the smallest rooms in the house and they are also one the most costly to renovate. Bathroom renovation is a job that, if done well, can add value to a home and a great space full of design and light.

Bathroom design

Bathroom design is the first area of your bathroom renovation you need to get right. Just replacing the existing bathroom with the same design may not be enough. The key to great bathroom design is to design it with the people that are going to use it in mind. However be sure that your bathroom design also has a general use factor as well. For example: If you were designing a bathroom for families you could still design the bathroom with easy access to the shower and bath. This would ensure that the design would also work for people with limited mobility. This means if you decide to sell your home or if you are renovating for profit your design has a wider market appeal. Great bathroom design also uses the space well, taking into account the light or window space, size of fittings, and drainage options. Draw out a plan to scale and right down the sizes of your room. Mark the existing drainage points and then and water inlet points. Write down a wish list of the bathroom fittings to need and want with their sizes. Now marry the two together and see what fits. Note: Most bathroom drainage and water inlet points can be moved but this does come at extra cost.

Bathroom remodel

If you have decided to do the work yourself or part of the work it is time to hire a skip bin and pull out the old bathroom. If your home was made pre 1980 you may have fibro bathroom wall linings with asbestos in it and great care will need to be taken. You will need some full body disposable overalls, eye protection, and quality dust mask. Check with your local building authority or council regarding the regulation on bathroom asbestos wall lining removal.

Remove everything except the plumbing. If you keep the bathroom plumbing in place you will not have to turn the water off for the whole house. Also you will need to jack hammer the floor tiles up and the sand and cement bed that they are laid on.

Bathroom Renovation and construction

Bathrooms must be construction properly from the ground up to ensure that the finished job is correct and true. This also ensures the design and look of the bathroom will have a great finish

The Bathroom Renovation Process

Install water and drainage pipe and electrical wires. Install wall lining and ceiling and then install the bath hob and bath. Waterproof the floor and shower and bath recess. Correct the fall of the floor with sand and cement ready for tiling. Lay floor and wall tiles and then grout. Install new bathroom vanity, fittings, and taps – install new electrical. Paint ceiling and final clean.Step one – Plumbing and electrical

At this point all new plumbing is installed for clean hot and cold water and drainage. Careful attention needs to be taken when positioning the new plumbing so that the plumbing fittings are correct when the tiling is finished. For example: To centre a fitting in a shower recess you must take into consideration the thickness of the wall board, tile glue and tile so the fitting will be centred after the tiles are in place. The same applies to installing drainage pipes for a toilet; the wall lining and tile thickness must be taken into account so the pipe is in the correct position when the toilet is installed after tiling. Also rough in the any new electrical wires without connecting them to the mains power.

Step two – Install wall and ceiling linings

Install your 6mm wall lining being careful to nail the fibro board every 150mm without nailing into the new pipes and electrical wires. The best way is to measure and mark the pipe and wire layout onto your new wall board with a pencil as you go. ***** up (or nail) the ceiling lining, plasterboard is the most common. However if you are laying your tiles from floor to ceiling do not install the cornice as this is best done after tiling. If you are not tiling to the ceiling go ahead and install the cornice after the wallboard and ceiling lining have been installed. Also if your bath is not freestanding you can now make up the frame and install the bath. Ensure the bath is installed correctly allowing for the thickness of the tiles and glue.Be sure to check all linings and pipes before you continue with your bathroom renovation.

Step three – Waterproof your bathroom

Waterproof your bathroom floor, shower recess, and around the bath. When waterproofing the floor ensure that the waterproofing comes 100mm up the walls. The shower recess will need to be waterproofed 100mm above the shower rose outlet. Also the bath should be waterproofed 100mm above the lip of the bath right around and to the floor. At the doorway install a 25 x 25mm aluminum angle glued into place with quality silicone and waterproof into the lip. Your whole bathroom should now the tanked, so the all water will only go down a drain. Bathroom waterproofing tip: waterproofing is an easy job but quality and accuracy is most important.

Step four – Lay in the cement screed for the floor.

Before the floor tiles can laid the floor must be smooth and fairly flat with a slight fall to the drainage outlet. To do this you must use sand and cement mix and it is best to add a waterproofing agent into this as well. With a level, set the floor level at the doorway. Use the top aluminum angle as the finished floor level and measure down the thickness of the tile plus 10mm for the glue. Mark right around the bathroom with a level and then screed in your sand and cement mix with a 1 to 3 degree fall to the top of the drain outlet. Take your time and get it right with the finished level as smooth as possible. When the sand cement mix has set but is not dry (you can walk on it but you it is still a bit soft) rub it over with a house brick. This will remove all the small highs and lows and check with a level as you go. Let the bathroom floor fully dry and then you should have a great surface to tile onto. Tip: the more work you put into the floor screed the easier your tiling will be.

Step five: Tile floor and walls

Lay your tiles on the floor first and then grout. Then lay your wall tiles making sure that they are level as you lay. Once the bathroom tiles have been cut and laid, grout all your tiles and then buff the tiles clean.

Step six: Install plumbing fitting and fixtures

Install all your plumbing fittings and taps. Also fit all your towel rails and soap holders. Fit your new bathroom vanity making sure it is level and sealed around the top with silicone and also seal around the bath. Tip: make sure they are in the right place before you drill into your tiles.

Step seven: painting, and cleaning – enjoy

Paint your ceiling and do a final clean making sure everything is fitted correctly and that there are no leaks in your plumbing. – Enjoy your new bathroom.